Oregon fire station blends metal and charred wood

by tanya_martins | May 22, 2024 2:19 pm

fire station[1]
 A light metal wraps the apparatus bay exterior. Photos courtesy Josh Partee

Inspired by local agricultural buildings, Fire Station 76 in Gresham, Ore., comprises of two masses: a vaulted apparatus bay clad with metal and an office and living quarters wrapped in charred wood.

The apparatus bay includes the emergency response vehicles, working spaces, a shop, bunker gear washer and storage, and an EMS room.

wooden canopy[2]
Shou Sugi Ban, a traditional Japanese technique, was used to char the wood surface, providing protection from rot, decay, and insects.

Shou Sugi Ban, a traditional Japanese technique, was used to char the wood surface, providing protection from rot, decay, and insects. Warm western red cedar-clad porches carve into the living quarters. A light metal wraps the apparatus bay exterior, while glulam four-centered arches spanned by tongue-and-groove cedar decking vault over the engines at the interior.

The 940 m2 (10,120 sf) station incorporates daylight harvesting, passive solar heating, a high-performance building envelope, an efficient mechanical system, LED lighting, and low flow plumbing fixtures. The station also has a rooftop solar panel array and a back-up generator.

Hennebery Eddy Architects worked on the architecture and interiors.

Endnotes:
  1. [Image]: https://www.constructionspecifier.com/wp-content/uploads/2024/05/TM_FireStation76-1.jpg
  2. [Image]: https://www.constructionspecifier.com/wp-content/uploads/2024/05/TM_FireStation76-2.jpg

Source URL: https://www.constructionspecifier.com/oregon-fire-station-blends-metal-and-charred-wood/